Mung Bean Jelly
Extracting Starch: Wash the mung beans thoroughly with clean water and soak them in a large vat for about 24 hours until they are fully hydrated. Grind the soaked beans using a mill, adding 400 kg of water for every 100 kg of mung beans to create a thin slurry. Pour the ground bean mixture into a large vat, mix in fresh slurry, stir well, and let it stand. This allows the starch to settle noticeably. After a few hours, remove the top layer of clear water, take out the middle layer of coarse starch (called “raw starch”), and transfer it to a second vat. Add fresh slurry, stir thoroughly, and allow the starch to settle again. Once settled, repeat the process by transferring the raw starch layer to a third vat, adding fresh slurry, stirring, and allowing it to settle. Continue this process until no more starch settles from the raw starch. Skim off the clear water on top, collect the settled starch, and filter it through a fine sieve or cheesecloth to remove any fine residue. During filtering, rinse repeatedly with water and fresh slurry. Collect the filtered liquid and let it settle again in a vat. Remove the clear water on top, take out the settled wet starch, place it in a cloth bag, and let the water drain out. The resulting product is a block of mung bean starch.
Mixing: Take 10 kg of mung bean starch and crush it into a fine, lump-free powder. Then add 20 kg of warm water and 40 g of alum, and stir until the mixture becomes thick and sticky. Quickly pour in 45 kg of boiling water while stirring vigorously to ensure even cooking. Once cooked, immediately pour the mixture into molds of a specific size, smooth the surface (similar to making tofu), and let it cool and set into a gel-like block.
Cutting: Once the jelly has set, turn the mold over onto a clean cutting board or frame, and cut it into pieces of the desired size to form the final product. It can also be cut into portions according to customer preference at the point of sale. Ensure the molds are smooth during production; you can add some cold water inside the mold when removing it. Generally, 5 kg of starch can produce about 10 kg of mung bean jelly. This method can also be used to make mung bean vermicelli or mung bean sheets.
This article is published by HowToTrip. Sharing and reposting are welcome — please credit the source.
Article URL: https://www.howtotrip.net/techan20175