Luo Shan Platycodon
Platycodon Cultivation Techniques
I. Site Selection and Land Preparation
Choose sandy loam plots with ample sunlight, deep soil layers, and good drainage. After selecting the site, apply 3000kg of organic compost or manure per mu, along with 50kg each of calcium superphosphate and cake fertilizer or 15kg of diammonium phosphate, spreading them evenly across the field. Plow the soil to a depth of 35cm, level and rake it finely, then create 1m-wide flat beds, with lengths adjusted according to the terrain.
II. Propagation Methods
(1) Seed Propagation: Growth period of 2 years.
In production, direct seeding is commonly used. Platycodon seeds are tiny, with a thousand-seed weight of 1.5g and an 85% germination rate. Under temperatures of 18–25°C and sufficient humidity, seedlings emerge 10–15 days after sowing.
Winter or Spring Sowing: Winter sowing is done from November to January of the following year, while spring sowing is from March to April. Winter sowing is preferable, typically done by broadcast seeding. When sowing, mix the seeds with moist fine sandy soil (ratio: 1 basin of soil to 0.3kg of seeds) and scatter them evenly over the bed surface. Lightly sweep with a broom so the seeds are just barely covered, then press down slightly. By the following spring, seedlings will emerge early and uniformly. For spring sowing, to ensure uniform emergence, seed treatment is necessary or the seeds should be covered with grass to retain moisture (treatment method: soak the seeds in 30°C warm water for 8 hours, then remove, wrap in a damp cloth, and place in a 25–30°C area, covering with a damp hemp cloth to encourage germination. Rinse with warm water once daily. After about 5 days, when the seeds begin to sprout, they can be sown). The sowing method is the same as for winter sowing, keeping the soil moist throughout, with seedlings generally emerging in around 15 days. Seed usage is 2.5kg per mu.
(2) Seedling Raising and Transplanting: Growth period of 1 year.
1. Seedling Raising: Platycodon seedling raising and transplanting can generally be done between April and June. Too early, the small size of the seedlings affects quality; too late, larger seedlings affect transplanting. Typically, 10–12kg of seeds are used per mu. Specific method: Select land that is neither on high slopes nor in low-lying fields—preferably well-drained plots. The land must be finely cultivated, with sufficient base fertilizer applied, preferably plowed more than one foot deep. Prepare the bed surface to facilitate sprinkler irrigation during droughts. Then, mix the platycodon seeds with fine soil and broadcast them evenly, lightly press down, cover with weeds, and keep the soil moist. Seedlings usually emerge in 10–12 days. Once the seedlings are fully emerged, remove the covering on a rainy day to aid seedling growth.
2. Transplanting: Growth period of 1 year. Conducted from autumn or winter of the same year to before bud break in the following spring. Select one-year-old straight platycodon seedlings, grading them by size, and plant them separately. During planting, on the prepared land, dig trenches 25cm deep at 20cm row spacing, then insert the platycodon seedlings diagonally at a 75° angle into the trenches. Plant them at 6–8cm plant spacing, cover and press the soil firmly, with the soil slightly higher than the seedling tops by about 3cm.
III. Field Management
1. Hoeing, Weeding, and Thinning After platycodon seedlings emerge, remove weeds. When the seedlings have 4 leaves, thin out weak ones. At 6–8 leaves, thin to 1–2 inch spacing. Perform shallow loosening of the soil when conditions are suitably dry or wet, maintaining loose soil and keeping the field free of weeds.
2. Drainage Platycodon is planted densely and is sensitive to waterlogging. Therefore, during the hot and humid plum rain season, ditches should be cleared promptly to drain water and prevent root rot from water accumulation.
3. Flower Removal The platycodon flowering period lasts up to 4 months. Flowering consumes considerable nutrients and easily leads to lateral branch growth. Therefore, flower removal is an important measure to increase platycodon yield.
IV. Pest and Disease Control
1. Root Rot Affects the roots, with infected roots showing blackish-brown spots, eventually rotting and causing the entire plant to wither. Control methods: (1) Drench the affected areas with a 1000x dilution of carbendazim. (2) Ensure proper drainage after rain, keeping the field not overly wet.
2. Powdery Mildew Primarily affects the leaves. When infected, the leaves become covered with gray powder, which can severely wilt the entire plant. Control methods: In the early stages of infection, spray with a 0.3-degree Bordeaux mixture or 500x diluted “Powdery Mildew Clear,” or use a 1800x dilution of 20% triadimefon powder.
V. Precautions
1. If other pests are found during the platycodon growth period, control them using conventional methods, but pesticide use is prohibited within 20 days before harvest.
2. Notes on Weed Control in Platycodon: In most regions of China, excessive weeds during platycodon cultivation affect growth. Since platycodon is a dicotyledonous plant, herbicide selection must be careful. The method is to follow recommendations from local plant protection authorities, then conduct small-scale trials in platycodon fields at the recommended ratios. Only after confirming no adverse effects on platycodon should large-scale application proceed, to avoid impacting growth.
This article is published by HowToTrip. Sharing and reposting are welcome — please credit the source.
Article URL: https://www.howtotrip.net/techan19736