Chucun Vermicelli
Chucun Vermicelli
Vermicelli is a major specialty of Chucun Town. The processing of vermicelli has a long history in Chucun, but large-scale production truly began after 1970 and flourished around 1990.
Sweet potatoes are the main raw material used in making vermicelli. Since Chucun is abundant in sweet potatoes, the first notable characteristic of its vermicelli is the large quantity produced. At its peak, almost every household processed vermicelli, with over 100,000 jin of vermicelli being transported out daily. The local market almost became a dedicated vermicelli market. The second characteristic is its pure white color — pure white (blinding white) is not considered top quality; instead, a bluish-white hue is best, with no black spots. The third is that it does not become brittle or break when held, but remains tough, springy, and resistant to overcooking. The strands come in both thick and thin varieties. In the 1970s and 1980s, production was mainly organized by communes, and flat, thick vermicelli, also called fěntiáo (vermicelli strips), were popular. By the 1980s, due to large-scale distribution (with outsiders preferring thinner strands), all vermicelli became finer, giving rise to the saying “Chucun vermicelli is as fine as hair and as white as silver.”
Vermicelli must be made from pure starch, and its nutritional value goes without saying. Its main appeal lies in its excellent texture — smooth, refreshing, and with just the right degree of chewiness, making it very popular among consumers.
Chucun vermicelli is convenient to eat. It can be soaked in hot water and served cold in a salad, stir-fried with meat, or added to soups. It is especially delicious when used as an ingredient in beef or mutton soup. In the depths of winter, visit a beef or mutton soup restaurant in Chucun, order a bowl of soup, take a couple of spicy sips while it’s hot, pick up a strand of vermicelli with your chopsticks, and then enjoy a small drink of liquor — you’ll feel warmth spreading through your whole body and a renewed sense of energy. It’s truly a delightful experience.
The production of vermicelli involves many steps and requires technical skill. There are two main processes.
The first is starch extraction.
First, mature sweet potatoes are washed and crushed, then filtered through a large sieve and rinsed with water. The water containing starch is collected in large vats or pools, where it settles. The starchy water is then drained of its liquid portion and black starch residue, leaving behind snow-white starch at the bottom. Finally, the starch is scooped out, dried, and set aside for later use.
The second is vermicelli processing. First, the dried or semi-dried starch is sieved. One or two large basins (used in rotation) are prepared. A certain proportion of starch (measured per basin) is taken to make the slurry (the thickness of which is also important), and an appropriate amount of alum powder is added and mixed evenly. Second is dough mixing, where the hot slurry is poured into the starch and stirred together. Originally, mixing was done manually by two or three people per basin, using their hands to knead the mixture vigorously in the basin. If the dough was too hard, hot water was added to soften and mix it thoroughly. If there was too much slurry and too little starch, the dough would not flow properly, resulting in unextrudable strands or those with bubbles and lumps. If there was too little slurry and too much starch, the strands would disintegrate into powder or fragments as soon as they hit the boiling water. In such cases, the entire batch of dough had to be discarded — a process called “digging out the basin.” The discarded dough could only be reused bit by bit in future batches, making the rework time-consuming and labor-intensive. Therefore, the person mixing the dough was usually someone with good technical skills. By the late 1990s, mixers were used to reduce labor intensity.
Once the dough passes a trial extrusion, formal vermicelli production begins. A large pot is filled with water and kept boiling (you should not wait for the water to boil after the dough is ready, because cooled dough is more likely to fail). Seven or eight workers coordinate seamlessly, like an assembly line — any delay in one part affects overall quality and output, so it’s often best to finish one batch of dough in one go.
During extrusion, one person operates the “pounder,” also known as the “beater.” The beater is made of sheet metal, cylindrical, with a handle. The cylinder is about seven or eight centimeters deep, with openings at both ends about 15 centimeters in diameter. The upper opening is slightly wider to facilitate loading the dough, while the lower opening has an inwardly rolled metal edge where a round, perforated metal disc (the "pound bottom") can be attached. Different discs allow for producing thick, thin, or flat strands. To extrude, a lump of dough is placed in the beater. The beater operator stands or sits behind the pot, lowers the beater over the boiling water, and strikes it with a fist or wooden mallet. The dough is then forced through the perforations to form strands that drop into the water. Once the dough in the beater has mostly extruded, someone adds more dough — this is called “refilling the beater” — until the entire lump is used up. The remaining dough in the basin must also be continuously kneaded to prevent it from hardening, a process called “turning the dough” or “handling the surface.” When the noodles are cooked (floating to the surface in boiling — but not bubbling — water; if no alum is used, they cook but don’t float), another worker scoops them out — known as “ladling the noodles.” This worker, sitting opposite the beater operator, uses a pair of long bamboo chopsticks or a single long bamboo strip to lift the cooked noodles into a cold water tank next to the pot. With the left hand, they guide the noodles, aligning them neatly before gathering a handful, cutting them off, and passing them to the washer. The washer rubs the noodles in the cold water tank, presses them with a stick, then transfers them to another ice-cold pool to chill. Afterward, they are taken out and laid curved on straw mats to “set” — a step called “squatting the noodles.” They are then washed again and straightened before being placed on racks. Washing, icing, and squatting the noodles all serve to remove the stickiness of freshly extruded noodles, preventing them from clumping into unpalatable masses. In the absence of icing, the noodles are called “wind-dried noodles,” and a defoaming agent like soybean oil is added during washing. In winter, with natural ice available, these are called “ice noodles,” allowing some washing steps to be skipped, which is quite convenient. Later, technology improved — beaters were mounted on frames, eliminating the need to hold them by hand, automatic hammers were used for pounding, and cold storage was used for icing. With the addition of mixers for dough, it could be considered somewhat mechanized. Eventually, vermicelli machines were introduced, making the process faster and more convenient. However, the taste and durability of machine-made vermicelli still cannot compare to traditionally boiled versions. Chucun vermicelli is pure in flavor, affordable, and high in quality. It is sold across the country and has indeed brought considerable benefits to the people of Chucun.
This article is published by HowToTrip. Sharing and reposting are welcome — please credit the source.
Article URL: https://www.howtotrip.net/techan12535