Home › Tourist Attractions › The Bridge and Tunnel Complex at Lianxia...

The Bridge and Tunnel Complex at Lianxiang Pass on the Yunnan–Burma Railway in Lufeng

Category: Tourist Attractions 👁 100 views
In 2009, the Lufeng County Cultural Relics Management Office discovered the Bridge and Tunnel Complex at Lianxiang Pass on the Yunnan–Burma Railway in Lufeng, hidden deep within the mountains, during the third national cultural relics survey. In 2013, it was designated as a county-level cultural relic protection unit by the Chuxiong Prefecture Government. In 2019, the Bridge and Tunnel Complex at Lianxiang Pass on the Yunnan–Burma Railway...

The Bridge and Tunnel Complex at Lianxiang Pass on the Yunnan–Burma Railway in Lufeng

The Bridge and Tunnel Complex at Lianxiang Pass on the Yunnan–Burma Railway in Lufeng is a National Key Cultural Relics Protection Unit.

In 2009, the Lufeng County Cultural Relics Management Office discovered the Bridge and Tunnel Complex at Lianxiang Pass on the Yunnan–Burma Railway in Lufeng, hidden deep within the mountains, during the third national cultural relics survey. In 2013, it was designated as a county-level cultural relic protection unit by the Chuxiong Prefecture Government. In 2019, it was included in the eighth batch of provincial-level cultural relic protection units by the Yunnan Provincial Government.

The Bridge and Tunnel Complex at Lianxiang Pass on the Yunnan–Burma Railway in Lufeng is located in Lianxiang Pass Village Committee, Jinshan Town, Lufeng County. It consists of a well-preserved section of railway bed, five bridges, and four tunnels. This section represents the most challenging part of the Yunnan–Burma Railway project, featuring the highest density of bridges and tunnels. It was constructed under the leadership of Gong Jicheng, a renowned Chinese railway engineer and then Chief of the Second Section of the Yunnan–Burma Railway. Spanning approximately 6,485 meters from south to north, the section includes the Sunset Nunnery Tunnel, Shangqing Tunnel, Xiaqing Tunnel, Xiaqing No. 1 Bridge, Xiaqing No. 2 Bridge, Zhaojiacun Tunnel, Zhaojiacun Bridge, Tianxin Bridge, and Liujiacun Bridge.

The railway route from Yunnan through Myanmar to India was an important corridor connecting China with the South Asian subcontinent, once planned by Sun Yat-sen. After the outbreak of the War of Resistance Against Japan in 1937, the construction of both the Yunnan–Burma Highway and the Yunnan–Burma Railway was put on the agenda. In 1938, the Yunnan–Burma Highway was completed and became China’s only international supply route for aid. However, due to severe limitations in the highway’s transport capacity, preparations for the construction of the Yunnan–Burma Railway began in the same year. The Yunnan–Burma Railway Engineering Bureau, affiliated with the Ministry of Transportation of the Nationalist Government, was established, with Zeng Yangfu, Vice Minister of Transportation, appointed as its head. The bureau also secured a $70 million loan from the U.S. government for railway construction. The Yunnan–Burma Railway started from Kunming, exited through the Nanding River estuary in Mengding, and connected to the Lashio Station of the Myanmar railway branch, spanning a total length of 836 kilometers. Around Lianxiang Pass, the railway had to descend from over 2,000 meters above sea level at Yanglaoshao to the 1,560-meter elevation of the Lufeng Basin. The Bridge and Tunnel Complex at Lianxiang Pass was undoubtedly one of the most challenging sections of the railway. By 1942, the railway bed for the entire route was largely completed, and the Bridge and Tunnel Complex at Lianxiang Pass was finished on schedule, with tracks laid from Kunming to Yipinglang. Following the outbreak of the Pacific War, Japan occupied Myanmar and invaded western Yunnan. To prevent Japanese forces from advancing into Yunnan along the railway, on May 12, the Nationalist Government ordered the swift demolition of the tracks. The western section of the Yunnan–Burma Railway was destroyed by explosives, while the eastern section was preserved. After the founding of the People’s Republic of China, construction resumed on the existing foundation, and the Kunming–Yipinglang railway was put into operation. In 1971, after the completion of the Chengdu–Kunming Railway, the narrow-gauge railway, which had low transport capacity, was dismantled.

From planning to partial completion, the Yunnan–Burma Railway underwent a tumultuous journey and was closely tied to the fate of modern China and the Chinese nation as a whole. It stands as a true testament to the Chinese people’s resilience and resistance in the face of national crisis. The construction of the Yunnan–Burma Railway brought together tens of thousands of top railway engineering professionals from across the country, with hundreds of thousands of people from all ethnic groups in Yunnan volunteering their labor. The project claimed the lives of around 100,000 workers, representing an enormous sacrifice. It made significant contributions to China’s war effort during the War of Resistance Against Japan. The Bridge and Tunnel Complex at Lianxiang Pass on the Yunnan–Burma Railway in Lufeng serves as the best witness and permanent memorial to this chapter of history, standing as nameless monuments to the engineers and workers who lost their lives and to the people of Yunnan who contributed to the railway’s construction.

The well-preserved section of the railway bed stretches 6,485 meters in length. Aside from minor localized damage, over 95% of it remains intact.

The tunnels are 3.5 meters wide and 4.5 meters high. Except for the Zhaojiacun Tunnel, where the stone walls and concrete arch have been removed, the other three tunnels have side walls built with dressed stone up to a height of 1.8 meters, with concrete arches above. The arch thickness is about 40 centimeters.

The Xiaqing No. 1 Bridge is a six-pier, five-span steel truss bridge with a total span of approximately 99 meters. The tallest pier, the fourth pier, stands about 24.7 meters high. The steel trusses have been removed, but the piers remain intact.

The Xiaqing No. 2 Bridge is a six-pier, five-span hybrid arch-truss bridge, 55 meters long and 3.4 meters wide. The two southern spans and the two northern spans are stone arches, each with a span of 4.8 meters, while the central span is a steel truss with a span of 22.4 meters and a height of about 13 meters. The steel trusses have been removed, the first northern stone arch has collapsed, but the remaining piers are intact.

The Zhaojiacun Bridge is a four-pier, three-span hybrid arch-truss bridge, approximately 48 meters long and 3.4 meters wide. The southern span is a stone arch bridge, but the stone arch has collapsed. The other two spans are steel truss bridges, each with a single span of 19 meters. The steel trusses have been removed, but the piers remain intact.

The Tianxin Bridge is a six-pier, five-span continuous stone arch bridge, 66 meters long and 3.4 meters wide, with a span of 8.6 meters and a height of about 15 meters. It is entirely constructed from finely processed metamorphic limestone hexagonal blocks, showcasing exquisite craftsmanship that remains well-preserved to this day.

The Liujiacun Bridge is a five-pier, four-span continuous stone arch bridge, 55.4 meters long and 3.4 meters wide, with a span of 8.6 meters and a height of about 8 meters. It is entirely built from finely processed metamorphic limestone hexagonal blocks, demonstrating meticulous craftsmanship and remaining in excellent condition.

On October 7, 2019, the Bridge and Tunnel Complex at Lianxiang Pass on the Yunnan–Burma Railway in Lufeng was included in the eighth batch of National Key Cultural Relics Protection Units.

Further Reading:

· Eighth Batch of National Key Cultural Relics Protection Units

Share

This page is published by HowToTrip. Sharing and reposting are welcome — please credit the source.
Page URL: https://www.howtotrip.net/artgk71264

↑